Call Us : +8615869615801;0086-577-86852888
|

How does the flange connect to pipes

Views : 669
Update time : 2016-11-22 23:23:47

A Stainless Steel  Flange is a method of connecting pipes, valves, pumps to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed into such systems and then joined with bolts.

Stainless Steel Welding Neck Flange

This flange is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favoured in critical applications


Stainless Steel Slip On Flange

This flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.



Stainless Steel Blind Flange
This flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.



Stainless Steel Socket Welding Flange
This flange is counter bored to accept the pipe before being fillet welded. The bore of the pipe and flange are both the same therefore giving good flow characteristics.



Stainless Steel Threaded Flange

This flange is referred to as either threaded or screwed. It is used to connect other threaded components in low pressure, non-critical applications. No welding is required.


Stainless Steel Lab Joint Flange
These flanges are always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it. This means the stub end or taft always makes the face. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these flanges can be supplied without a hub and/or in treated, coated carbon steel.


Stainless Steel Ring Type Joint Flange
This is a method of ensuring leak proof flange connection at high pressures. A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal. This jointing method can be employed on Weld Neck, Slip-on and Blind Flanges.